Install a mirror: Is it easy to install and maintain the security mirrors?

Maintenance of Security Mirrors:

The security mirrors offered on our website require minimal maintenance. You don't need any expensive detergents; your safety mirror can be cleaned just with a mix of warm water and soap. However, make sure you don't use strong chemicals for this purpose, as they might damage some materials, such as acrylic.

Installation of Security Mirrors:

There are some slight differences in the installation of the different types of security mirrors. However, all the mirrors have pre-drilled holes located on the back side which makes the installation relatively quick and easy.

It is a good idea to always check the product description in order to find the installation details of the specific mirror you are interested in.

Full 360° domes can be either suspended or flush mounted to the wall or ceiling. Ideally, they must be placed 2.5 meters above floor level. There is also a set of chains available for the stainless steel full domes, which can be bought as a separate accessory.

Half 180° domes are flush mounted between the ceiling and the wall using the pre-drilled holes on the backside.

Quarter 90° domes are typically flush mounted in the corner of the wall and the ceiling.

Most convex mirrors (both indoor and outdoor) include a wall bracket that allows mounting to a pole, pipe or wall. For some of them, the wall-mount bracket is offered as a separate accessory.

Production mirrors can be easily installed using the pre-drilled holes.

Industrial mirrors come with either a holder which allows mounting to the wall or with a pipe clip. There is also an optional wall-arm for mounting to the wall or other flat surfaces.

Outdoor traffic mirrors include a bracket and can therefore be mounted to a wall, pipe or pole.

T-Panorama traffic mirrors come with a pipe clip. However, there is an optional wall-arm that can be used to mount on a flat surface.